Related Knowledge Of Hardware Lathe Parts

Hardware lathe parts can be applied in a wide range of fields, involving electronic and electrical, hardware special tools, small toys, plastics and other fields. Regarding other fixed parts, its key feature is high precision, the public service can reach plus or minus 0.01MM, or even more accurate. Naturally, its price is relatively much higher than other fasteners.

Active hardware lathe parts are parts processed by active lathes. The larger hole diameter is 20mm, and the larger machining length is 90mm. Because the machined parts are small and the speed is high, the price is relatively cheap, and the machining precision is relatively high. The load can be adjusted within plus or minus 0.01mm.

CNC hardware lathe parts are parts processed by CNC numerical control machine lathes. The maximum machining aperture can reach 60, and the maximum machining length is 300mm. The machined parts are large, disorganized, and high-precision. Reaching plus or minus 0.002mm, the products related to processing stainless steel are more advantageous. Due to the precious equipment and low processing efficiency, the processing cost is relatively high.

The processing cost of hardware lathe parts is relatively higher than that of other hardware products, which is determined by the processing technology of milling, high precision, low speed and low annual output value. After a very large part of the lathe parts are processed in the machine, the secondary processing is required to satisfy the functional requirements, such as: slot milling, drilling, edge milling, and rounding.