How to avoid stainless steel nut locking? Correct operation is important

Although some people have heard of stainless steel nuts, they are not very familiar with their specific use methods. Errors often occur when using them. Once the wrong operation methods are used, the nuts will be locked and cannot be used. Therefore, it is very important to find the correct operation method.

Too hard and too fast

When some operators use stainless steel nuts, if the force is too strong or the locking speed is too fast, it may lead to locking. At this time, it is necessary to use a torque wrench or a socket type wrench, and avoid using an adjustable wrench or an electric wrench. The main reason is that using an electric wrench often leads to locking speed too fast, and the temperature rises rapidly. If the operator installs such nuts, he must handle them with care, and the installation speed should not be too fast.

Wrong direction and angle of applying force

When installing stainless steel nuts, it is necessary to find the correct direction and error of applying force. If the direction and angle of exerting force are wrong, the nuts will be locked directly. At the same time, pay attention that the nut must be perpendicular to the axis of the screw, and then screw in. Pay attention not to tilt.

When installing, pay attention to placing a washer. Using the washer can effectively prevent the locking from being too tight. Therefore, when using this kind of nut, people can start from purchasing and pay attention to purchasing from the regular manufacturer through the regular channel. During the specific installation and use, it is necessary to avoid making the above mistakes. If there is any problem in purchasing, you can directly contact the customer service personnel on the official website of the manufacturer to solve it, At the same time, the full-automatic inspection shall be carried out to comprehensively inspect the size and size of the nut, the burr and the burr.