Why Does The Hinge Screw Slip And How To Prevent It?

The importance of hinges to furniture and kitchen cabinets is self-evident. If the screws of the hinges are not good, it will cause great trouble. If the tail screws are slippery, the cabinet door will be separated from the cabinet body. If the adjustment screw is not easy to use, there will be seams that cannot be adjusted, and the application effect will be greatly reduced. After all, it will affect the user's evaluation of furniture and kitchen cabinets: the quality is too poor.

Get such an evaluation, then your board information and how beautiful the workmanship is nonsense, so the importance of the hinge screws must lead to attention.

To determine whether the screw can withstand the test, we usually check as follows:

1. Take a screwdriver, apply more force to the screw than normal, and test more points, of course this is one way.

2. The other thing I want to say is the problem of hardware structure: is the bite position of the screw satisfied? Many hinge screws in the market have only two and a half bite positions. This is a very fatal structural fault, and the appearance of slippery teeth. The rate is very high, and we must pay attention to not purchasing such commodities.

3. See if the threads of the screws are clear, usually poor screw workmanship and materials are poor, and the threads are messy.

4. Are longer screws better? This is wrong. The length of the screw can be as long as it is suitable. For example, for adjusting the screw, even if you use 15 cm long, it is impossible for you to use it in practice, because if you adjust too much, there will be seams, which will affect the furniture and kitchen cabinets. Observability, hierarchy, this is not desirable.

5. When the user uses too much force, the hinge screws will be damaged, resulting in slippery teeth. The strength and speed of the cloak should be grasped for the damage caused by the screws.